Bernette B05 Crafter - Adjusting Stitch Balance

Creative sewing
35
2020-09 EN 5220105.00A.04
In perfect straight stitching, the bobbin thread is not visible on the right side of the fabric.
1
2
3
4
1 Upper thread 3 Right side (top side) of fabric
2 Bobbin thread 4 Wrong side (bottom side) of fabric
> To increase the upper thread tension, set the «Upper thread tension» dial to a higher value.
> To decrease the upper thread tension, set the «Upper thread tension» dial to a lower value.
> If the bobbin thread is visible on the right side of the fabric, set the upper thread tension to a lower
value.
> If the upper thread is visible on the wrong side of the fabric, set the upper thread tension to a higher
value.
Adjusting the balance
Different fabrics, threads and linings can affect stretch stitch patterns or buttonholes, causing them to be
sewn incorrectly. Mechanical balance adjustment enables these deviations to be corrected and the stitch
pattern to be optimally adjusted for the fabric to be worked with.
> Select a stretch stitch pattern or buttonhole.
> Adjust the stitch length.
> Adjust the stitch width.
> Correct the balance by using a coin to turn it.