EasyManua.ls Logo

Bernette B05 Crafter - Page 51

Bernette B05 Crafter
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Practical stitches
51
2020-09 EN 5220105.00A.04
> Fold the edge of the fabric about 3mm and turn it over again. Fold the first 5cm of the fabric edge to
be sewn.
> Place the edge of the fabric with the left-hand side of the fabric facing up under the presser foot. The
fabric under the presser foot should be just less than the width of the presser foot.
> Sew 4–5 stitches.
> Raise the needle and presser foot.
> Pull the fabric backwards by about 10–15cm. Do not cut the thread.
> Hold the 4 threads in your left hand. Pull the edge of the fabric into the spiral guide on the hemmer foot
using your right hand.
> Lower the presser foot.
> Continue sewing slowly while slightly folding the cut edge of the fabric in front of the hemmer foot and
holding it to the left. Guide the edge of the fabric evenly into the spiral guide on the hemmer foot and
sew.

Table of Contents

Other manuals for Bernette B05 Crafter

Related product manuals