Bernette B05 Crafter - Embellishing Seams

Quilting
66
2020-09 EN 5220105.00A.04
> Sew the parts together with a seam allowance of 5mm or guide the parts along the patchwork foot
guide.
5 mm
> Iron the seam allowance apart.
Embellishing seams
> Fit the zigzag foot.
> Set the decorative stitch you have chosen.
> Set the required stitch width.
> Set the needle position to «Center».
> Continue to work on the right side of the fabric.
> Place the joining seam under the center of the presser foot.
> Sew over the seam using a decorative stitch.