35
Overview Display
Mirror image (Up/Down)
The sewing computer sews the stitch pattern vertically
mirrored, up/down referring to the sewing direction.
Presser foot indicator
█
touch icon
►
shows recommended presser foot
►
the active Display shows optional presser feet for
the selected stitch pattern
█
touch «Back»-icon
►
the Display is closed
Permanent reverse sewing
The sewing computer sews the selected stitch pattern
in permanent reverse.
Balance
Balances forward and reverse stitches.
Lettering size in alphabets
█
select alphabet
►
letter size is 9mm
█
touch icon
►
activates number «2»
►
the font size is reduced
Presser foot pressure
The presser foot pressure is set via the adjustment
wheel on the left side of the headframe.
►
the respective value is visible in the icon
Mirror image (Left/Right)
The sewing computer sews the stitch pattern horizon-
tally mirrored, left/right referring to the sewing direction.
Altering pattern length
█
move the round knob in the Display using the touch
pen or the finger
►
pattern length (Standard = 100%) is infinitely
variable
█
extend/shorten in 1%-steps with the arrow icons or
█
touch «Pattern length»-icon
►
pattern length is extended in 100%-steps
Maximum length is 200%, shortest length is 10%.
Security program
█
touch icon
█
touch «Needle»- or «Stitch plate»-icon
Overview Needle:
█
touch desired «Needle»-icon
►
stitch width is limited automatically
►
this prevents the inserted special needle from
hitting the presser foot and the stitch plate = no
needle breakage
►
numbers in the needle icons indicate the needle
distance in mm
█
touch «Standard needle»-icon
►
Standard needle is activated again
►
stitch width limitation is deactivated
Overview Stitch plates:
█
touch the desired «Stitch plate»-icon
►
stitch width is limited automatically
►
this prevents the needle from hitting the
presser foot and the stitch plate = no needle
breakage
The function remains active even when the sewing
computer is turned off and on.
To Next Page
