34
Overview Display
Altering Alphabet
A Securing
B Pattern repeat
C Upper thread tension
D Needle position
E Mirror image (Left/Right)
F To alter pattern length
G Security program
H Mirror image down/up
I Presser foot indicator
J Permanent reverse sewing
K Balance
L Lettering size in alphabets
M Presser foot pressure
█
touch «Alphabet»-button
█
select Alphabet
█
touch «i»-icon
Overview Functions Alphabets
General Functions
Information
█
touch icon
►
opens another Display
Back
█
touch icon
►
goes back to the previous Display
►
all changes are saved
Confirm selection
█
touch icon
►
activates or confirms alteration/selection
Leaving the active Display
█
touch icon
►
closes Display
►
shows the previous Display
A
D
H
B C
E F G
I
J
L M
K
Securing
█
touch icon before sewing
►
single stitch is secured at the begin with four
securing stitches
█
touch icon while sewing a single stitch
►
the single stitch is secured at the end
►
the sewing computer stops
█
to program the securing function within a pattern
combination
█
each individual pattern of the combination can be
secured at the start or the end
Pattern repeat
█
touch icon 1x
►
number 1 appears: the sewing computer stops at
the end of an individual stitch or stitch combination
█
touch icon 2-9x
►
numbers 2-9 appear: the sewing computer stops at
the end of a stitch or a stitch combination after the
number of repeats selected
Upper thread tension
█
change upper thread tension
►
the respective value is visible in the icon
Needle position
█
move the needle to the left or to the right using the
arrow icons left/right or with the touch pen or with
the finger
█
keep arrow icon pressed
►
quick movement of the needle
►
the needle position is displayed in the yellow-fra-
med icon
█
touch yellow-framed icon
►
moves the needle to the middle (Position 0)
To Next Page
