36
Overview Display
Combi mode
A Deleting
B Editing combinations at cursor position
C To edit the whole combination
D Upper thread tension
E Altering the needle position
F Mirror image (Left/Right)
G Altering the pattern length
H Security program
I Long stitch (without alphabets)
J Mirror image (Up/Down)
K Presser foot indicator
L Permanent reverse sewing
M Balance
N Lettering size in alphabets
O Presser foot pressure
█
touch «Combi mode»-icon
█
select stitch pattern
█
touch «i»-icon
Deleting
Deletes an individual stitch.
Editing a combination at cursor position
█
touch icon
►
the Display is opened
Editing the whole combination
█
touch icon
►
the Display is opened
Upper thread tension
█
change upper thread tension
►
the respective value is visible in the icon
Altering the needle position
█
move the needle to the left or to the right touching
the arrow icons left/right or using the touch pen or
with the finger
█
keep arrow icon pressed
►
quick movement of the needle
►
the yellow-framed icon shows the needle position
█
touch yellow-framed icon
►
moves the needle to the middle (Position 0)
Mirror image (Left/Right)
The sewing computer sews the stitch pattern horizontally
mirrored, left/right referring to the sewing direction.
Overview Functions Combi mode
General Functions
Information
█
touch icon
►
another Display is opened
Back
█
touch icon
►
goes back to the previous Display
►
all changes are saved
Confirm selection
█
touch icon
►
activates/confirms the alteration/selection
Leaving the active Display
█
touch icon
►
closes Display
►
goes back to the previous Display
A
E
I
B C D
F G H
J K
M ON
L
To Next Page
Loading...
