86
Buttonholes
Darning foot No. 9 (optional accessory)
Button sew-on foot No. 18 (optional accessory)
Button sew-on program No. 60
For buttons with 2 and 4 holes.
Preparation
█
lower the feed dog
Sewing on a 4-Hole button
█
sew the front holes first
█
carefully move the button forward
█
sew the back holes with the same program
For a increased stability the button sew-on program can be sewn
twice.
Sewing on Buttons
Buttons sewn on for decorative purposes only are stitched without a thread
shank. «Shank length» = distance between button and fabric; can be adjusted
with Button sew-on foot No. 18
Sewing on buttons with darning foot No. 9 (optional accessory)
█
select button sew-on program
█
check distances between holes with the handwheel
█
adjust stitch width if necessary
█
hold the threads when starting to sew
█
sew the first securing stitches into the left hole
█
sew program
►
sewing computer stops automatically when program is completed and is
ready for the next button
Beginning and ending threads
The threads are secured and can be trimmed.
For a increased stability
█
pull on both bobbin threads until the ends of the upper threads are visible
on the wrong side
█
pull the threads out and knot the ends additionally
█
trim the threads
Sewing on buttons with foot No. 18 (optional accessory)
█
set the shank length with the screw on the foot
█
select button sewing-on program and continue as with foot No. 9
█
touch «Buttonhole«-button
█
touch «Button sew-on program»-icon
Button sew-on program
To Next Page
Loading...
