97
BSR
Beeper (Acoustic signal) activation/deactivation
█
touch «Setup»-button
█
touch «Audio setting»-icon
Selecting sound for BSR in the Setup Program
►
one sound is set as default (active)
█
touch the icon 1 showing the loudspeaker for BSR
►
the loudpseaker is highlighted in red
►
the sound for the beeper is inactive
The loudspeaker is gray when the sound for the Beeper is active.
1
Selecting sound for BSR in the «BSR»-display
█
touch the icon with the loudspeaker
►
the loudspeaker is highlighted in red
►
the sound for the beeper is inactive
The icon with the loudspeaker is gray and yellow-framed when the sound for
the Beeper is active.
The sound selection icon 2 is only visible if the sounds are turned on
in the Setup Program.
2
To Next Page
Loading...
