Power switch
Operating Instructions
Control elements
The power switch controls both the machine power and the sewing light. When leaving the
machine unattended, or servicing the machine, switch the machine off, and remove the
power cord from the wall outlet.
Looper cover
⦁
To open the looper cover, pull it to the right and flip it down-
wards.
⦁
To close the looper cover, flip it upwards and push it to the left.
It engages automatically.
The cut-offs bin needs to be removed before the looper
cover is opened.
1
1
2
1
2
⦁
To open the sewing table, hold onto the grip near the cutting
width dial (1) and push it to the left (2).
⦁
To close the sewing table, swivel it to the right until it engages.
1 Grip on the sewing table
2 Opening the sewing table
Sewing table
To Next Page
Loading...
