1
2
3
3
3
4
4
5
5
5
6
6
8
9
8
7
7
Threading the right needle (green)
1
1
2 3
3
3
5
5
5
4
4
6
6
9
8
8
7
7
⦁
Prepare maschine for threading.
(„Threading - General information“ see
page 24).
⦁
Make sure that the handwheel is in
threading position (Handwheel position
indicator window) (1) and the presser
foot is lifted.
⦁
Feed the thread from the back through
the thread guides (2).
⦁
Thread through the pretension(3).
⦁
Pull the thread through the thread ten-
sion (4).
⦁
Pull the thread through the thread guide
(5).
⦁
Continue to thread into the lower take
up lever slot (6) and through the right
slot in the thread guide (7).
⦁
Finally thread through the right slot in
the needle holder thread guide (8).
⦁
Thread the right needle eye (9).
⦁
Pull about 10 cm/ 4" of thread to the
back and place it under the presser
foot.
To Next Page
Loading...
