Elasticator Foot
The Elasticator foot is available at the BERNINA specialized store.
This foot will guide the elastic and at the same time it applies pressure to the elastic with
a specially designed tension controlled roller.
⦁
Attach the Elasticator foot.
⦁
Set up the 4- / 3- or 2- thread overlock.
Adjust the cutting width.
Adjust the pressure foot pressure.
Do a test run to set the tension of the roller with the screw (1).
⦁
Place the elastic under the roller and the complete foot sole.
⦁
Fix the elastic by sewing a few stitches.
⦁
Place the fabric under the presser foot and sew it together with the elastic.
1 Tension controlled roller
1
To Next Page
Loading...
