Bernina L460 - Multi-Purpose Foot; Piping; Pearls Along the Fabric Edge; Pearls Along a Fabric Fold

L 450
L 460
41
Optional Accessories
Multi-purpose Foot
Piping
The Multi-purpose foot is available at the BERNINA specialized store.
⦁
Attach the Multi-purpose foot.
⦁
4- or 3-thread overlock.
⦁
Piping (corded bias fold tape).
⦁
Place folded piping between fabric layers.
⦁
Sewing on braid or ribbon for straight seams.
⦁
2- or 3-thread overlock.
Pearls along the fabric edge
Up to 4mm pearls on a string
⦁
Attach the Multi-purpose foot.
⦁
3- or 2-thread overlock right needle
 Stitch length up to 4
 Adjust the presser foot pressure.
 Adjust the differential feed to 0.7 -1
 Test run
⦁
Place the pearls in the channel on the foot with 3 cm of pearls extending behind the
foot.
⦁
Make one stitch via the handwheel to secure the pearls.
⦁
Line up the fabric edge to extend slightly over the foot guide and along the pearls.
⦁
Sew pearls on the edge of the fabric.
Pearls along a fabric fold.
⦁
Attach the Multi-purpose foot.
⦁
3- or 2-thread flatlock right needle
 Stitch length up to 4
 Deactivating the knife
 Adjust the thread tension.
 Test run
⦁
Place the pearls in the channel on the foot with 3 cm of pearls extending behind the
foot.
⦁
Make one stitch via the handwheel to secure the pearls.
⦁
Line up the fold to extend slightly over the foot guide.
⦁
Open the flatlock.