Bertolini 140 - Lubrication; Type of Lubricant; Engine Lubrication; Gearbox Lubrication

41
1 2 3
Fig. 13
A
B
Fig. 13/1
LUBRICATION
(Fig. 13)
TYPE OF LUBRICANT
Engine: see engine manual.
Mower: use only ESSO UNIFARM 15-40 W
oil and ESSO MULTIPURPOSE grease.
1) ENGINE
Every day: check level and top up if necessary.
Oil replacement: to be carried out according
to intervals and methods set out by the engine
manufacturer.
2) GEARBOX
(capacity 1,8 Kg.)
Every 20 hours: check level and top up if
necessary.
Every 500 hours: replace oil.
3) POWER TAKE-OFF FOR IMPLEMENTS
Before attaching Implements, fi ll up with
Multipurpose grease.
GEAR BOX
OIL REPLACEMENT
(Fig. 13/1)
Oil must be replaced when hot, by unscrewing
fi ll cap A and fi ll cap B equipped with an oil
dipstick.
When oil is completely drained, replace cap A
and fi ll up with new oil through hole B (1.8 Kg).
Check level by using dipstick on cap B.
This operation is to be done with mower in
horizontal position.