BL-E30-0515 - 03-01-2018 10-7
10-2.PUMP MOTOR.
The pump motor is replaceable but not repairable.
Refer to paragraph 9-3.
10-3.DRIVE MOTOR.
The drive motor exposed surfaces should be cleaned
at least once a month to assure proper cooling of
motor. Use an air hose to blow dust off of motor sur-
faces.
The drive motor is replaceable but not repairable.
Refer to paragraph 7-1.
10-4.DEADMAN SWITCH
10-4.1.Replacement
1. Turn off the key switch (20, Figure 12-18) and
emergency disconnect (17).
2. Remove the upper compartment covers as
described in paragraph 5-2.
1. Disconnect wiring from the deadman switch (16,
Figure 12-1).
2. Remove the two screws (3), and bracket (11) from
bracket (5).
3. Remove two screws (12) and switch (16) from
bracket (11).
4. Position the new switch (16) on bracket (11) and
secure with the two screws (12).
5. Position bracket (11) on bracket (5) and secure
with two screws (3).
6. Install upper compartment covers as described in
paragraph 5-2.
7. Turn on the key switch (20, Figure 12-18) and
emergency disconnect (17).
To Next Page
Loading...
