BAT.EST NO
Establishes whether the terminal is powered
by a 220V electricity main with adapter or by
internal batteries (those housed in the ABS
case). The terminal recognises which of the
two sources is activated.
Consult chap. 6. on page 1-53 for the
specifications, connections and charging
operations.
YES
The terminal is powered by external batteries
connected to the powering connector.
Consult chap. 6. on page 1-53 for the
specifications, connections and charging
operations.
If the external battery is selected, the terminal
will not handle the charging and discharging
operations but will only measure the input
voltage.
N.STRUM
This parameter defines the number of the
instrument if interrogations with the RS485
protocol are required.
1, 5, 10, 15, 20, 50
N.PIECES
Number of pieces that can be set.
Defines the first value displayed in the AUW
calculation procedure (par. 5.10.1 on page
1-48).
WARNING
If the NCSTAB and FILTRD parameters are precisely
programmed, you can obtain a fast but poorly stable
instrument, a stable but slower instrument or a compromise
between the two situations.
D70
1-83
To Next Page
Loading...
