BD/ED/FD (E2) Service Manual
State: 01/2002 Created: 06/2002 / Jochen Tussinger
16
4.5 Activation or deactivation of 0.1 steps at the temperature display.
At the controller R3 it is possible to activate or deactivate the 0.1 step at the display.
At BD chambers which could heat up to 100°C the function is activated.
At ED and FD chambers the function is deactivated. Please note that the 0.1 steps is only displayed up to
99.9 °C, at 100°C the 0.1 step is deactivated automatically.
Step 1 – Deactivation of the Level-Protection
To access the parameter level you have to unlock
the Level-Protection.
You have to press the Button and for
at least 10 seconds simultaneously
Now you’ve reached the menu “Code”
Press the Button to set the value “001” to
“000”
To confirm your setting press the Button
to go back to the normal display
To Next Page
Loading...
