Binder FP 53 - Page 44

FP (E1.1) 07/2017 page 44/90
Normal Display
Display 1 shows
e.g. 19.8
(actual temperature value)
Display 2 shows e.g. 15.05.06 13:52 - -
(actual date and time, actual switching state of week
program timer channel 1: Off, channel 2: Off)
Press down key for 5 sec
Display 1 shows
e.g. 0000
Display 2 shows
PROGRAM EDITOR
(you are in the program editor)
Press down key for 5 sec
Display 1 shows
0000
Menu visible only if week program timer is activated.
Display 2 shows
WEEK PROG. EDITOR
(you are in the week program editor)
Press down key for 5 sec
Display 1 shows
0000
Display 2 shows
USER – LEVEL
(you are in the user level)
Hit program key
Display 1 shows
0000
Display 2 shows
UserCod?
0000
(enter user code, display flashes)
Enter the user code with arrow keys
e.g. 0001 (basic setting, or the valid code in
case it has been previously changed in this
menu). Value is displayed in both displays.
Automatically forward after 2 sec
Display 1 shows
1
(actual address)
Display 2 shows Address 1
(entry of chamber address)
(actual address: 1)
Hit several times key
until Prog.Clk appears:
Display 1 shows
0000
Display 2 shows Prog.Clk Active
(Week program timer active or inactive?
(actual setting: Active)
Select “Active” with arrow keys
Setting is displayed in display 2.
Hit key
Display 1 shows
0000
Display 2 shows 12h/24h 24h
(Display mode 12 hours or 24 hours?
(actual setting: 24h)
Hit key
Display 1 shows
0000
Display 2 shows
Date
(Main menu: Setting the date of the real time clock)
Hit program key
Display 1 shows
e.g. 2006
(Actual setting: 2006)
Display 2 shows
Year
2006
(Setting the year of the real time clock)
Set year (2006 up to 2050) with arrow keys
Setting is displayed in display 2.
Hit key
Display 1 shows
e.g. 5
(Actual setting: may)
Display 2 shows
Month
5
(Setting the month of the real time clock)
Set month (1 up to 12) with arrow keys
Setting is displayed in display 2.