FP (E1.1) 07/2017 page 76/90
19.6 Accessories and spare parts (extract)
BINDER GmbH is only responsible for the safety features of the chamber provided skilled
electricians or qualified personnel authorized by BINDER perform all maintenance and repair,
and if components relating to chamber safety are replaced in the event of failure with original
spare parts. The user is responsible for any risk arising from using unauthorized accessories.
Perforated rack, stainless steel
Door gasket made of FKM (temperature
resistant up to 200 °C)
8012-0494
8012-0495
8012-0496
8012-0497
8012-0498
Stable table on wheels with castors and
locking brakes
9051-0018
9051-0018
9051-0019
9051-0019
--
Rubber pads for safe stacking (4 pieces)
Chamber fuse 5x20mm / 250V / 10Amp
time lag (T)
5006-0012
5006-0012
-- -- --
Chamber fuse 5x20mm / 250V / 16Amp
semi time lag (M)
-- -- 5006-0013
-- --
Data logger software, including converter-cable
HEPA Fresh air filter, class EU 14H 14 (DIN EN 1822:2009)
Neutral cleaning agent, 1 kg
For information on components not listed here, please contact BINDER Service.
Qualification folder IQ-OQ
Qualification folder IQ-OQ-PQ
Calibration of temperature including certificate (1 measuring point)
Spatial temperature measurement including certificate (9 measuring points)
Spatial temperature measurement including certificate (18 measuring points)
Spatial temperature measurement including certificate (27 measuring points)
Measurement of air change rate acc. to ASTM D5374