FP (E1.1) 07/2017 page 75/90
Multifunction program controller RD3 with digital
display
Temperature safety device class 2 acc. to DIN
12880
Communication and printer interface RS 422
Rear exhaust duct, internal diameter 50 mm / 1.97
in with ventilation slide
Adjustable air change by means of rear exhaust
duct (50 mm / 1.97 in) with ventilation flap and front
Four castors (2 lockable)
Access ports, various diameters, with silicone plug
Rack, chrome-plated or stainless steel
Perforated rack, stainless steel
Reinforced rack stainless steel, with 1 set of rack
-- --
Reinforced inner chamber with 2 reinforced racks
Rubber pads for safe stacking (4 pieces)
Temperature safety device class 3.1 acc. to DIN
12880:2007
Door(s) with window and interior lightning
FKM door gasket (temperature resistant up to 200
°C)
HEPA Fresh air filter, class H 14 (DIN EN 1822)
Measurement of air change rate acc. to ASTM
D5374
Increased air change by stronger fan
Inert gas connection (gas inlet and outlet) with
mostly gas-tight version
-- -- --
Additional measuring channel for digital object
temperature indicator with flexible temperature
Analog output 4-20 mA for temperature with 6 pole
DIN socket, DIN plug included
Zero-voltage relay outputs via DIN socket 6 poles
Temperature calibration including certificate
Spatial temperature measurement including
certificate
Chamber acc. to cUL standard in 115V 1N~60Hz
Chamber acc. to cUL standard in 208 V 3N~60Hz
Sturdy trolley, castors with locking brakes
Legend: Standard equipment Optional -- Not available