Binder FP 53 - 1.5 General Installation and Operation Safety

FP (E1.1) 07/2017 page 8/90
Symbol on the type plate
Information
CE conformity marking
Electrical and electronic equipment manufactured / placed on the
market in the EU after 13 August 2005 and to be disposed of in a
separate collection according to directive 2012/19/EU on waste
electrical and electronic equipment (WEEE).
The chamber is certified according to Customs Union Technical
Regulation (CU TR) for the Eurasian Economic Union (Russia,
Belarus, Armenia, Kazakhstan Kyrgyzstan).
(FP-UL only)
The equipment is certified by Underwriters Laboratories Inc.
®
according to standards CAN/CSA-C22.2 No. 61010-1, 2
nd
Edition,
2004-07 (Electrical Equipment for Measurement, Control, and
Laboratory Use; Part 1: General Requirements); UL 61010-1, 2
nd
Edition, 2005-07-22 (Electrical Equipment for Measurement, Control,
and Laboratory Use; Part 1: General Requirements); IEC 61010-
1:2001, 2
nd
Edition and IEC 61010-2-10 (Particular Requirements for
Laboratory Equipment for the heating of materials).
1.5 General safety instructions on installing and operating the chambers
With regard to operating the chambers and to the installation location, please observe the DGUV
guidelines 213-850 on safe working in laboratories (formerly BGI/GUV-I 850-0, BGR/GUV-R 120 or ZH
1/119, issued by the employers’ liability insurance association) (for Germany).
BINDER GmbH is only responsible for the safety features of the chamber provided skilled electricians or
qualified personnel authorized by BINDER perform all maintenance and repair, and if components
relating to chamber safety are replaced in the event of failure with original spare parts.
To operate the chamber, use only original BINDER accessories or accessories from third-party suppliers
authorized by BINDER. The user is responsible for any risk caused by using unauthorized accessories.
CAUTION
Danger of overheating.
Damage to the chamber.
∅ Do NOT install the chamber in unventilated recesses.
 Ensure sufficient ventilation for dispersal of the heat.
Do not operate the chambers in hazardous locations.
DANGER
Explosion hazard.
Danger of death.
∅ Do NOT operate the chamber in potentially explosive areas.
 KEEP explosive dust or air-solvent mixtures AWAY from the chamber.