After turning your Atomlab ON and completing the
Self-Test or chamber selections, do not press any keys for at
least an hour. This allows the sensitive electronics to stabilize.
PACKING MATERIAL
Now that you have set up your Atomlab Dose Calibrator, and
everything is intact and functioning properly, take a few
moments to repack the packing material. This material was
esp e cially designed for safe shipment of the Atomlab Dose
Cal i brator and should be considered part of the instrument.
Place the shipping material in the appropriate boxes and put
the boxes back into the shipping carton. Label the carton and
store it in a safe, out-of-the-way location. If you ever need to
return your dose calibrator for updates, calibration, or repair,
use the original shipping carton, boxes, and shipping material.
GENERAL CLEANING INSTRUCTIONS
As required, wipe down the exterior of the unit using a soft
rag slightly dampened with alcohol.
ATOMLAB Dose Calibrator Operation Manual Chapter 2
Biodex Medical Systems 2-7 Release 2.0
To Next Page
Loading...