E30 Digital Electrocardiograph User’s Manual
2-1
Chapter 2.Safety
2.1 Safety Information
Warning:
Before putting the system into operation, verify that the Cardiograph,
connecting cables and accessories are in correct working order and
operating condition.
Use only accessories specified by our company. Using other
accessories may cause damage to the Cardiograph.
Do not open the Cardiograph housings; electric shock hazard may
exist. All servicing and future upgrades must be carried out by the
personnel trained and authorized by manufacturer only.
To avoid explosion hazard, do not use the Cardiograph in the presence
of flammable anesthetics or other flammable substance in
combination with air, oxygen-enriched environments, or nitrous
oxide.
Don’t use this device where exists high voltage device or high static
electricity, or else, there is fire because of spark.
Please connect the Cardiograph to a socket with protective earth. If
the socket does not have protective earth conductor, please do not use
the socket and use battery to provide power to the Cardiograph.
To avoid burning, when using the ESU device, make sure those
electrodes is far away from electrotome.
Do not let patient come into contact with the sickbed during
defibrillation. Please use the ECG cable supplied by our company. It
is not suggested to use it with other electrical stimulator device at the
same time, if necessary to use at the same time, professional
technicians must be present and disposable chest electrode is
suggested to use in order to avoid burning skin caused by metal
electrode.
To insure patient safety, leakage current summation caused can’t
0
To Next Page
Loading...