E30 Digital Electrocardiograph User’s Manual
9
Appendix C Prompt Information
Prompt information Cause
No paper Chart paper is not installed or chart paper is used up
Roller not in place Rubber stick is not been well pressed
Print head overheating Print head of recorder is overheating
Demo The system is in demonstration status.
Lead missed Electrode and lead wire fall off or are disconnected.
Lead fall-off Electrode falls off from the patient.
Analyzing Data are being analyzed.
Learning
The self-study process of arrhythmia algorithm in
sampling mode is triggered.
Recording ECG data are being recorded.
Sampling now Data are being collected.
Error--1 Failed to prepare data
Error --2 Failed to analyze
Error --4 Failed to turn on SPI
Error --5 There is not enough SPI buffer
Error --6 Failed to start SPI
Error --8 Failed to pack data
Error --9 Failed to stop SPI
Error --10 Unknown cause
To Next Page
Loading...