E30 Digital Electrocardiograph User’s Manual
7
Appendix B Factory Default Setting
This chapter lists some important factory default settings of electrocardiograph.
Users can not change them, but electrocardiograph can be recovered to factory default
setting according to actual need.
NO. Item Factory Default Setting
1 Work Mode Auto
2 Sample mode Pre-sample
3 Analysis Display
4 Measure Display
5 AC filter 50Hz
6 DFT filter On
7 EMG filter Off
8 Lowpass filter 100Hz
9 Gain 10mm/mV
10 Speed 25mm/s
11 Rhythm style Three lead
12 RHY lead CH 1 Ⅱ
13 RHY lead CH 2 V1
14 RHY lead CH 3 V5
15 Key volume Off
16 Power off delay Off
17 LCD delay Off
18 Height unit cm
19 Weight unit Kg
20 Auto save No
21 Default medium Flash
To Next Page
Loading...