E30 Digital Electrocardiograph User’s Manual
7-2
7.2 Cleaning of the Electrocardiograph
Common detergent and non-corrosive disinfectant used in hospital can be
applied to clean electrocardiograph, however you must be aware that many
kinds of detergents must be diluted prior to utilization, and please use it
according to the instruction of detergent manufacturer.
Avoid the use of alcohols, amino or acetonyl detergent.
The enclosure and screen of electrocardiograph shall be free of dust, and
they can be wiped with lint-free soft cloth or sponge soaked in detergent.
While cleaning, be careful and do not spill liquid onto the instrument and keep
any liquid out of it. When wiping the side panel of electrocardiograph, you
must be especially careful to keep water out of all kinds of cable and outlet on
the panel.
Do not use abrasive material including wire brush or metal brightener
during cleaning because this material will damage the panel and
electrocardiograph screen.
Do not submerge the electrocardiograph in liquid.
While cable or plug of attachment accidentally gets wet, please rinse it
with distilled water or deionized water and dry it in the environment of
temperature 40℃ to 80℃ for at least one hour.
Caution:
Avoid the environment with high temperature and humidity
Avoid sunshine, dust or bump, and avoid shook acutely while moving.
7.3 Cleaning and Sterilizing of Accessories
1． ECG cable
a) Please clean cable before disinfection.
b) Clean the surface of cable by use of soft cloth dipped with appropriate
quantity of clean water or neutral soap water;
c) Dip soft cloth with appropriate quantity of disinfector, and wipe the cable;
d) Clean the residual disinfector on cable by use of soft cloth dipped with
clean water;
To Next Page
Loading...