BP-007 User’s Manual
- 48 -
ESC c 5 n Enable/disable panel buttons
Format: ASCII: ESC c 5 n
Decimal: 27 99 53 n
Hex: 1B 63 35 n
[Description]
Enable or disables the panel buttons.
• When n＝＜*******0＞B, all buttons are enabled (Default).
• When n＝＜*******1＞B, all buttons are disabled.
ESC d Print and feed n lines
Format: ASCII: ESC d n
Decimal: 27 100 n
Hex: 1B 64 n
[Description]
Print the data in the print buffer and feeds n lines.
n=0～255.
ESC e Print and feed reversely n lines
Format: ASCII: ESC e n
Decimal: 27 101 n
Hex: 1B 65 n
[Description]
Print the data in the print buffer and feeds n lines in the reverse direction.
n=0～2. The maximum reverse paper feed spacing is 48 dots (48*0.176mm).
ESC i Full cut
Format: ASCII: ESC i
Decimal: 27 105
Hex: 1B 69
[Description]
Execute a full cut of the paper roll by auto cutter.
ESC j Print and feed reversely
Format: ASCII: ESC j n
Decimal: 27 106 n
Hex: 1B 6A n
[Description]
Print the data in the print buffer and feeds the paper in the reverse direction by 1/144 inch.
If there is no data in the print buffer, the printer will feed paper directly. n=0~48.
ESC m Partial cut
Format: ASCII: ESC m
Decimal: 27 109
Hex: 1B 6D
[Description]
Execute a partial cut of the roll paper.
To Next Page
Loading...
