- Only use a power supply provided by BIXOLON.
BIXOLON shall bear no responsibility for damage caused
by using a third-party power supply.
- Check the power supply’s label to check its electronic specs.
- For the safety of people and equipment, please use the appropriate
power cord for your country or region.
- When removing the power supply, make sure you have a firm
grasp of power connector and the printer, then pull horizontally.
- Pay attention to the direction in which you insert the power cable.
- Be sure to turn off the printer before connecting the power connector
to the printer. This can cause serious electrical damage and bodily
injury.
- Do not operate the printer and power supply in a humid
environment. This can cause serious electrical damage and bodily
injury.
- Do not connect an input voltage beyond the specifications of
the power supply. This may result in product damage and fire.
To Next Page
Loading...
