Operating instructions FK 23 Installation
6.066.98.5.10.05 en 4 - 1
4
4 Installation
4.1 Transport and storage
When transporting the machine, shoes with toe caps must be worn and
suitable lifting devices must be used.
At least two persons are necessary to move the machine. Weight of
machine is higher than 25 kg.
Before installation, store and transport the machine in the original packaging.
The machine has to be transported and stored in accordance with the symbols on the
packaging.
The machine may only operate when positioned on a level floor.
4.2 Installation and assembly
Installation, putting into operation as well as instruction regarding operation, cleaning,
maintenance, care and servicing, is initially carried out by the responsible Bizerba Custom-
er Service Agent or the Bizerba specialist.
4.2.1 Installation requirements
The installation surface needs to:
– provide sufficient space, Dimensions, see chapter 9.1
– be horizontal and flat
– be slip-proof and tilt-proof
– be stable and rigid, Machine weight, see chapter 9.1
The recommended table height is approx. 1,100 mm.
Provide sufficient work space for operator. For hygienic reasons it should be accessible
from at least 3 sides.
To Next Page
Loading...