Operating instructions FK 23 Maintenance
6.066.98.5.10.05 en 8 - 1
8
8 Maintenance
8.1 Preparation for cleaning
Clean thoroughly:
– before putting into operation
– depending on use and application frequency
– if extremely soiled, several times a day
– after end of process
– after a longer down time
WARNING Saw blade!
Danger of cutting injury also if saw blade is at standstill.
– Wear cut-proof gloves when cleaning and replacing the saw blade.
– Store saw blades securily so that nobody can harm oneself.
Switch off machine.
Pull out power plug.
To Next Page
Loading...