Operating instructions FK 23 Maintenance
6.066.98.5.10.05 en 8 - 3
8
Peel off saw blade deflector
and deflector
from bearing bolt.
Now the machine is ready for cleaning.
8.3 Cleaning
CAUTION High-pressure cleaner!
If water gets into the machine it can damage electric components.
– Do not use a high pressure cleaner for cleaning.
– Clean machine with low pressure smaller 30 bar.
– Only clean membrane keyboard with a moist cloth.
Clean removable and non-removable parts according to the cleaning plan. See chap-
ter 8.4.
Remove residues from products from any dismantled and fixed machine parts.
Apply cleaning detergent as per cleaning pan.
Rinse all disassembled and fixed machine parts with drinking water.
Rub machine dry, put the dismantled machine components individually on a clean
cloth and let them dry.
To Next Page
Loading...