Hauptverwaltung Balingen
P.O. Box 10 01 64, 72301 Balingen
Wilhelm-Kraut-Straße 65
72336 Balingen, Germany
Date: 22.10.2012
Signature of manufacturer: ppa.
Title of signatory: Andreas Wilhelm Kraut
Chief Executive Officer Development (CEO-D)
Bizerba GmbH & Co. KG
6.066.98.5.10.04 en
Declaration of conformity for plastic materials with direct food contact
We herewith declare that the materials used in the following machine
Designation:
Meat and bone saw
Model: FK 23
are in conformance with the general requirements of the following directives and laws in
the valid version at the time of issuance of this declaration:
• Regulation (EU) No. 1935/2004 on materials and articles intended for contact with
food
• Regulation (EU) No. 10/2011 on materials and articles made of plastic intended for
contact with food
For the plastic parts used which, when properly used, can come into contact with food, lab-
oratory tests were performed by a certified test laboratory. Both the total migration and the
specific migrations are below the legal threshold values.
The materials and raw materials used conform to regulation (EU) No. 10/2011.
Specifications on proper use or limitations:
– Type(s) of food that may come into contact with the materials:
mainly frozen meat, sausage and fish as well as bones
– Handling duration and temperature when in contact with food:
Maximum 30 minutes at max. 40°C
– Ratio between the area coming into contact with food and the volume, used to deter-
mine the conformity of the material or article:
6
Functional barriers made of plastic are not used in the specified machine.
Information on suppliers or preliminary suppliers can be provided on request.
To Previous Page
Loading...