Bizerba VS12D - Position on bench; Electrical connection

Installation Operating instructions VS12D /C /-R /-V /-
V/R
4 - 2 6.083.98.5.10.10 en
4
The installation surface needs to:
– provide sufficient space, Dimensions, see chapter 9.1 until 9.2
– be horizontal and flat
– be slip-proof and tilt-proof
– be stable and rigid, Machine weight, see chapter 9.1 until 9.2
The recommended table height is approx. 800 mm.
4.2.2 Position on bench
Bench optional.
Load the legs of the mobile bench and block the 4 castors through the brakes.
4.2.3 Electrical connection
Information on the rating plate
Bizerba logo BIZERBA
Machine type VS12D /D-R /CD VS12D-V /D-V/R
Machine description Slicer
Machine number ... ...
Production code X-.. X-..
Protection class IP 33 IP 33
Electrical data see specification plate see specification plate
Manufacturer's address Bizerba GmbH & Co.KG
D-72336 Balingen
MADE IN GERMANY
Check before mains connection
Before you connect the machine, check the electric data on the rating
plate with the mains data about the power supply.