Operating instructions VS12D /C /-R /-V /-
V/R
About this machine
6.083.98.5.10.10 en 2 - 3
2
Materials
The complete machine housing as well as the gauge plate, blade cover and carriage, are
made of anodized aluminium.
Optionally the surface can be finished with Ceraclean (VS12CD).
The back panel , the slider guard and the remnant holder plate are made of transparent,
break-proof and food-grade plastic, which is approved for foodstuffs.
For better gliding of the product, parts which are in contact with the product to be sliced
are provided with grooves.
All materials used in the food zone and in the working area comply with the food hygiene
regulations. For bearings in visual range, food-grade lubricants are used.
Work place-related emission noise level value
L
pA
= 53 dB (A). The value takes into consideration an instable measuring of 3 dB.
Vibration
The total vibration of the items, which get into contact with hand and arm is below 2.5 m/s
2
and therefore below the required limited value.
2.2.1 Name of components VS12D
Fig. 1: Name of components VS12D
To Next Page
Loading...
Need help?
General
