Operating instructions VS12D /C /-R /-V /-
V/R
Operation
6.083.98.5.10.10 en 6 - 3
6
6.2 Inserting and slicing product with the VS12D-V
WARNING Rotating blade!
Cut injuries
– Do not allow yourself to become distracted. Concentrate on the
task in hand and avoid time pressure.
– During operation, do not reach into the path of the carriage.
– Never push product ends towards blade by hand.
CAUTION There are spikes on the product holder!
Risk of injury.
– Use handle when working with product holder.
– Claws are lowered into a rest position.
Fig. 19: Inserting the product
The machine is switched on, all func-
tional parts are in a stop position.
Disengage product holder using the
locking lever, pull away from blade.
To Next Page
Loading...
Need help?
General
