Operating instructions VS12D /C /-R /-V /-
V/R
Maintenance
6.083.98.5.10.10 en 8 - 7
8
Deflector
Fig. 40: Deflector
Remove deflector from magnet lock and
move away in arrow direction.
Now the machine is ready for cleaning.
8.3 Cleaning
CAUTION Splash water!
If water gets into the machine it can damage electric components.
– Do not clean machine with a steam jet or similar device!
– Use only a moist, not wet, cleaning cloth.
– Cover the machine when the surroundings are cleaned with spray
and/or pressurized water.
Removed parts
Fig. 41: Removed parts
Clean removed parts in warm water us-
ing a soft cleaning agent. Leave to dry in
the air.
To Next Page
Loading...
Need help?
General
