Operating instructions VS12D /C /-R /-V /-
V/R
Maintenance
6.083.98.5.10.10 en 8 - 1
8
8 Maintenance
8.1 Preparation for cleaning
Clean thoroughly:
– Before putting into operation,
– Depending on use and application frequency,
– If extremely soiled, several times a day,
– After sharpening,
– after longer down times.
WARNING Unprotected blade!
Coming in contact with the sharp blade can lead to serious inju-
ries.
– Always wear cut-proof gloves when cleaning.
– Do not clean the surfaces of the blade when operating the ma-
chine!
Fig. 26: Slice thickness below "0"
Switch off machine.
Pull out power plug.
Set slice thickness below "0" (black
marking).
To Next Page
Loading...
Need help?
General
