MNS-BB Software User Guide
-112-
maxreauth – [optional] The number of re-authentication attempts that are permitted before the Port
becomes Unauthorized. Default value is 2. Values can range from 0 to 10.
transmit – [optional] This is the transmit period, this is the time in seconds the authenticator waits to
transmit another request for identification from the supplicant. Default value is 30. Values can be
from 1 to 65535 seconds.
LE2425A(auth)##portaccess port=2 quiet=120 maxreauth=7 transmit=120
Successfully set port access parameter(s)
LE2425A(auth)##show-port access
Port Quiet Period Max Reauth Tx Period
(sec) (sec)
=================================================
1 60 2 30
2 120 7 120
3 60 2 30
4 60 2 30
5 60 2 30
6 60 2 30
7 60 2 30
8 60 2 30
9 60 2 30
10 60 2 30
11 60 2 30
12 60 2 30
13 60 2 30
14 60 2 30
15 60 2 30
16 60 2 30
17 60 2 30
18 -- -- --
19 -- -- --
20 -- -- --
21 -- -- --
22 -- -- --
23 -- -- --
24 -- -- --
25 60 2 30
-- Port not available
reauth:
This command configures how the authenticator performs the re-authentication process with the
supplicant.
Syntax: reauth port=<num|list|range> [status=<enable|disable>] [period=<10-86400>]
port – [mandatory] – ports to be configured
status – [optional] This enables/disables re-authentication
period – [optional] this is the re-authentication period in seconds. This is the time the authenticator
waits before a re- authentication process will be done again to the supplicant. Default value is 3600
seconds (1 hour). Values can range from 10 to 86400 seconds.
LE2425A(auth)##reauth port=2 status=enable period=300
Successfully set re-authentication parameter(s)
LE2425A(auth)##show-port reauth
Port Reauth Status Reauth Period (sec)
To Next Page
Loading...
