27 BA-106/1EA M53.10XX
8.3 - Function errors
8 - Troubleshooting
Error Cause Solution Comment
Clamps do not
function (optional)
Incorrect clamp button position Change clamp button position See point 3.1.3
Clamp valve defective
Indicator lamp bulb defective
Drive circuit fuse defective
Bracket hardware is loose or defective
Replace clamp valve
Replace neon bulb
Have an licensed electrician replace the
drive circuit fuse
Attach bracket hardware or replace
none
See point 7.1.3
none
none
Other problems Replace air filter none
Replace hoseHose is kinked or not tight none
Chip blow-off is out of position Correct chip blow-off by turning the blow-off
hose
none
Operational status
indicator does not
light
Air filter is not tight
Chip blow-off is
defective
Gearbox defective Spindles or gears are damaged Replace gearbox none
To Next Page
Loading...
Need help?
General
