BLUM MINIPRESS P Operator's Manual

3 BA-106/1EA M53.10XX
This machine has been manufactured using the highest quality materials to provide long lasting performance.
Rigorous quality controls and a final inspection ensure that each machine is delivered in good working condition. These quality con-
trol measures enable Blum to offer this one year limited warranty on the machine, starting with the date of delivery.
Information is set forth below regarding a general description of the warranty on this machine. However, the specific warranty provi-
sions are contained in the Blum terms of sale, and those provisions constitute the specific terms of the warranty provided for this
machine.
Unless otherwise specifically agreed to in writing signed by a representative of Blum, THERE ARE NO OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING A WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THOSE SPECIFICALLY DESCRIBED IN THE TERMS OF SALE.
Should any defect be found in the machine, please submit to Blum, in writing, the reference number, the serial number, and the name
of the distributor from whom the machine was purchased. Replacement parts included under this warranty will be furnished free of
charge.
This warranty or guarantee only includes the replacement of components; however, it excludes assembly times, driving times, inci-
dental or consequential damages, etc. For your own safety, you should only use Blum-approved replacement parts and accessories.
Blum is not liable for any damages resulting from the use of unapproved products.
In no event shall Blum be liable for:
• damage in transportation (please file a claim immediately with the carrier)
• Blum is not responsible for any damage caused from misuse or improper equipment operation.
• lost production time
• loss of earnings
• lost or damaged materials
• parts which are subject to normal wear
• drill bits
• damage caused by not observing the safety rules.
A - Limited Warranty
Dear valued Blum customer,
We would like to congratulate you on your decision to purchase the Blum boring and insertion machine. You are now the owner of a
modern, high-quality machine that will give you years of productive use with the proper care and maintenance.
We realize that your time is valuable. However, you should carefully read these Operators’ Manual before you set up and use the ma-
chine for the first time. In this way, you will best determine how to adjust the machine to your needs as well as protect yourself against
injury. In addition, the Operators’ Manual also contain important information about machine maintenance.
At the time of printing, these Operators’ Manual contained up-to-date information for this model. This information is subject to change
due to continual development of the machine design. These Operators’ Manual are an important component to the
machine and must be transferred to the new owner if the machine is sold.
For your own safety, you should only use Blum-approved replacement parts and accessories. Blum is not liable for any damages
resulting from the use of unapproved products.
Blum GmbH retains the right to make changes to and/or cancel without replacement the technical design, equipment, tech-
nical information, color, materials, services provided and similar without prior notice and without explanation as well as the
right to discontinue production of a specic model also without prior notice.

BLUM MINIPRESS P Specifications

General

Brand	BLUM
Model	MINIPRESS P
Category	Power Tool
Language	English