Bjong – User Manual – V1.0 - pg.10
Green: App connection, Red: active alarm, Yellow: diagnostics, Blue: data
transmission modem status
-10°C … +50°C (14°F … 104°F)
Immersion up to 1 year @ 1 mt
H242 mm X D166 mm – 1,1 Kg (mounting system NOT included)
Water proof, military type
Electromagnatic Comatibility
(EMC) e Safety (LVD)
Directive 2014/53/EU RED – Art. 3.1a– Art. 3.1b– Art. 3.2
EN 62368-1: 2014 + A11:2017 + AC:2017
FUNCTIONAL FEATURES OF BJONG
Through a free of charge Android
TM
app, the user can setup the device with a simple and intuitive
interface typical of modern apps. In, the user can download data and events, monitor the values read,
diagnose the device. Bjong is connected to the user's device (tablet, smartphone) via a secure Wi-Fi
connection. The downloaded files are in CSV format, easily processed in Excel.
Via Remote system (under development)
Through signal leds, by checking the case’s mechanical and environmental conditions.
Data acquisition time from 1 minute to 60 minutes using cyclic buffer.
255 alarm event using cyclic buffer
Warm-up time for each I/O
Analog inputs: measuring range, entering a linearization curve on 16 points, entering offset. Calibration
on low and full range. Current or voltage input selection.
Digital counter inputs: pulse weight, totalization, average value in the unit of time
To Next Page
Loading...