3
General information
Bjong is a data logger developed and made by B.M. Tecnologie Industriali using its experience in
thousands field applications.
It has its main use in all the functions regarding water cycle, such as: flow rate and pressure measurement
in full pipes or open channels, parameters analysis on drinking and waste water, spillways and overflows
activations, submerged and not contact level measurement, events acquisition (on/off), etc.
Bjong can be supplied by an internal primary battery to manage low consumption sensors for a long time,
but it could also be supplied by an external battery, connected to a dedicated input, to manage sensors
with higher power consumption. External high capacity battery can be easily removed and replaced.
Bjong is suitable for medium and long term monitoring campaigns. Its built-in memory can record over
800.000 records.
Its built-in modem allows transmission of saved data and diagnostics to a remote server in order to
monitor the device’s status and the data reading. The device could be equipped with a built-in high
efficiency antenna for data transmission even if the signal is low, or with an external antenna.
Bjong can manage alerts on every variable through the event recording, transmitting to a remote server,
sending SMS to a list of users. For each alarm it is possible set activation and deactivation delay.
IP68 protection of the datalogger unit and its modules complete the excellent performances of this device.
EasySetup App for Android
TM
, connecting via Wi-Fi, thanks to its simple interface, similar to smartphones,
allows the user to setup the device and read data.
To Next Page
Loading...