3.1 Main sensors
✓ Area velocity doppler sensor for flow measurement on part filled pipes and open channels.
✓ Transit Time module for flow measurement on full pipes.
✓ Built-in pressure sensor for pressure measurement of full pipes.
✓ Radar and Ultrasonic sensor for level/flow measurement on open channels.
✓ Overflow sensor for overflow detection.
✓ Analytical sensors for the analysis of water quality and chemical-physical parameters.
✓ Digital pulse inputs for volumetric flow meters reading.
✓ Digital event inputs for monitoring on/off status (activation).
✓ Connection of standard 4..20mA or 0..10V sensors for standard signal recording.
3.2 Main applications
✓ Water Losses: DMAs and measurement of inflows.
✓ Monitoring Campaigns for the calibration of mathematical models.
✓ Measurement in the sewage networks for overflow activation and volumes.
✓ Water losses in water networks.
✓ Search for extraneous waters in sewage networks.
✓ DMAs – District Metered Areas.
✓ Overflow check.
✓ Fire systems check.
✓ Calibration of numerical models.
✓ Long and short term measurement campaigns in aqueducts and sewers.
✓ Water balances.
✓ Pumping stations.
✓ Water treatment plants.
✓ Hydroelectric plants.
✓ Industrial processes monitoring.
To Next Page
Loading...