BM BJONG - App Easysetup; Device Features for App Easysetup Installation

Bjong – User Manual – V1.0 - pg.30
11 App EasySetup
Bjong is completely configurable via EasySetup, a dedicated Android
TM
app that connects to the device
via Wi-Fi network.
Each device has a unique ID number consisting of an alphanumeric
sequence of 12 characters (numbers from 0 to 9 and letters from A to F)
shown on a label stick outside the case.
This ID is used for the name (SSID) of the generated Wi-Fi network: the
network name is in the format BJONG_xxxxxxxxxxxx, where the ID will
be present in place of the x's.
If multiple devices are connected to the same Wi-Fi range, multiple networks will be available. To access
the correct device, special attention must be paid to its identification.
If the device is in low power mode, Wi-Fi network is not available (radio is turned off). Use the
magnet to activate it.
11.1 Device features for App EasySetup Installation
The device in which we need to install the App EasySetup, should have at least the following features
(smartphone or tablet):
✓ Android
TM
6.0
✓ 1GB RAM
✓ Min. 7” display
✓ 15MB free space for installation
Please notice the device used for App installation, will be from now on mentioned as “tablet”.