11.7 “Save” and “Save and upload” buttons
Configurations displays have normally two different buttons: “Save” and “save and upload”.
The "save" button allows you to save the changes made only and exclusively on the tablet
in use: the changes are saved only locally and not sent to the Bjong. This button is useful if
you want to make multiple changes in multiple configuration tabs before loading the entire
profile on the instrument. Of the two, he is the only one who always remains enabled, even
in the off-line mode of the App.
The "save and upload" button allows you to save the changes and, simultaneously, send
them to the instrument to be immediately effective. This button is not available in case the
App is off-line.
Note that, in the case of only local saves, the status bar turns orange to remind you that the changes made
are not yet effective.
To Next Page
Loading...