The functionality linked to the AUX1..4 auxiliaries is determined during the instrument’s
production phase. The standard configuration is “A”, with the cleaning and alarm relay
contacts. The configuration can be changed: to do this, contact the assistance service. The
actual possibility of using the auxiliaries is bound to the presence of the relative connectors
mounted on the instrument. The selection of the connectors on the instrument is made during
the ordering process according to the purchase code.
The use of connectors not supplied by B.M. Tecnologie Industriali or incorrect connection
with respect to what is indicated in this manual can cause irreversible damage to the
instrument.
To Next Page
Loading...