Bjong – User Manual – V1.0 - pg.48
Circumference, external diameter, pipe thickness, internal
diameter: these are the dimensions, in millimeters, of the
pipe. By updating one of them, the others are automatically
updated.
Pipe material: it is possible to choose among a standard list.
Sound speed in pipe: it is the speed of propagation of sound
into the pipe material. It must be specified only if the
material is not among the predefined ones.
Coating material: it identifies the pipe coating, if any. It is
possible to choose among “no inner coating” and a list of
standard liners.
Sound speed in coating: it is the speed of propagation of
sound into the pipe coating. It has to be specified only if the
material is not included among the standard ones.
Coating thickness: it is the thickness of the coating, in
millimeters.
Liquid: it is the fluid flowing into the pipe. It is possible to
choose it among a list of standard fluids.
Speed of sound in liquid: it is the propagation of sound into
the fluid. It has to be specified only if the fluid is not included
among the standard ones.
Transducers type: it is referring to the type of transducers
installed on the pipe. It is possible to select them among
different types of available transducers. Enter the ones
connected to the Bjong.
Mounting mode: it the type of installation for the sensors:
✓ V – sensors on axis
✓ Z – opposite sensors
To Next Page
Loading...