Without height sensor on the
front wheel:
Adjust compression damping on
the front suspension strut.
The separate adjustment of
height sensors required for
rebound and compression
damping is not offered by
BMW Motorrad . Available at
racing accessory stockists.
You can request more detailed
information by sending an email
to "hp-race-support@bmw-
motorrad.com".
Calibration of height
sensor
Calibration of ride-height sensor
on the rear suspension strut, e.g.
after changes to the suspension
height ( 101).
Engine speed for shift
light ON
Engine speed for shift light ON in
rpm.
6
92
z
On the race track
To Next Page
Loading...
