Bodet Sigma Mod - Adding DHF Receivers to the System

20
7.4 Adding DHF receivers
To place the SIGMA in “DHF initialisation”
mode and enable synchronisation of a new
clock, validate the initialisation mode with the
key,
The following screen is displayed :
Select “ACTIVE” mode using the and
keys and validate with the key.
The “init” display mode will appear alternately with the normal display during
this period (4 hours).
It is possible, once the receivers DHF initialized, to stop this mode in this
menu.
Add DHF receivers ok
Bank Holidays õ
Init mode:ACTIVE ú
Add receivers ok