Bodet Sigma Mod - Modifying Program Steps in Circuits; Deleting Entire Circuit Programs; Viewing Circuit Operational Status

28
8.2.3 Modify a program step
Select the number of the circuit you wish to modify a program step using the
key.
Select the PROG mode with the and
validate with the key.
Select the program step to be modied with
the key.
Modify and validate.
8.3 Deleting a program
Select the number of the circuit you wish to
delete using the key.
Select DELETE mode with the and
keys and validate with the key.
After validation, all the steps of the program
are deleted.
8.4 Viewing the status of a circuit
Select the number of the circuit of which you wish to view the status with the
key.
Select STATUS mode with the and
keys and validate with the key.
You will see the theoretical status of the
programming circuit: ON, OFF, FORCED ON
(if the circuit is forced manually to ON) or
ACTIVE (if an action is in progress).
Cir.1:08:00:00 06s ú
MTWTFS- Weekly 03/05ok
Circuit 12: START ú
Access control ok
Circuit 12:DELETE ú
Access control ok
Circuit 12: START ú
Access control ok
Circuit 12:STATUS ú
Access control ok