Bodet Sigma Mod - Setting Time and Date

22
7.7 Time and date
To change the time or the date of the SIGMA,
validate the option with the key,
The following screen is displayed :
You have access to the time zone selection.
The time zone selection allows you to
automatically manage winter/summer time changeovers.
If the zone is not available in the 20 pre-
programmed towns or time zones, select
“PROG” mode which is programmed in the
technician menu.
“PROG” mode allows you to congure personalised time zone differentials and
time changeovers.
By default it is in “PROG” mode.
The hour is ashing: set the hour using the
and keys and move on to the
minutes with the key.
Proceed in the same way for the date.
Validate with the key. If the time has been changed, the seconds are
reset to 0.
When conrming, the catching-up of time will begin (fast impulses) or will wait
if the catching-up time is superior to the waiting time.
Time and date ok
Dynamic reception õ
Time zone : LONDON ú
(GMT + 00:00) ok
Time zone :PROG ú
(GMT) ok
Time 10:12:00 ú
Date 14/01/14 ok